Loading... Please wait...

Categories

Our Newsletter


100 Pack of Fluorescent Red UV Dye Tabs DFTB-C7.

  • Rhodamine uv red dyes may be dropped or flushed directly into drains, sewers or other points in the system.
  • How Fluorescent Dye Tracing Products Work by using the visual method, our dye products refers to normal reflection of light as color but enjoy black light as well.
RRP:
$59.45
Your Price:
$48.78 (You save $10.67)
SKU:
DFTB-C7100Pack
Weight:
22.00 Ounces
Shipping:
Calculated at checkout
Quantity:


Product Description

DFTB-C7 Fluorescent Red EPA Approved & Certifed for Drinking Water Tracer Additive Concentrate.

* Use visually or with a Risk Reactor Inc. black light.
* 5/8" Tablets Per Bottle!
* 1 Tablet Will Make 60 Gallons of Tracer!
* Certified to the ANSI/NSF Standard 60 for Potable Water!
* Dissolved in 5-8 Minutes!
* Perfect for Cooling and Plumbing Systems
* Also Sold in Other Sizes!

Benefits of Risk Reactor Inc's DFTB-C7 Red Water Based Tracer:

  • Highly concentrated saving you money!
  • Fluoresces under long wave black light!
  • Safe and non-toxic!
  • Can be used with our 6" Hand Held Black Light for mobility!
  • Can be used with UV sensors for automation!

Used In:

- Plumbing Tracing.
- Retention Time Studies.
- Flow mapping and rate of flow studies.
- Condenser coil and tube studies.
- Power plant piping tracing.
- Septic system analysis.
- Pollution Studies.
- Leak Detection in many fluid carrying systems.
- Lake river and pond analysis.
- Check for illegal connections.
- Storm and sewer drain analysis.

Technical Information:

PHYSICAL DATA PHYSICAL STATE-DRY TABLET ODOR AND APPEARANCE-Red, WITH NO APPARENT ODOR
SPECIFIC GRAVITY APPROXIMATELY 1.0
VAPOR DENSITY Not Applicable
VAPOR DENSITY Not Applicable
EVAPORATION RATE (Butyl Acetate = 1) Not Applicable
BOILING POINT Not Applicable
FREEZING POINT Not Applicable pH --@ Not Applicable
SOLUBILITY IN WATER HIGHLY SOLUBLE

General Properties

Tablets

Liquids (version 200)

Powders

Detectability of active ingredient 1

Visual <100 ppb

Visual <100 ppb

Visual <100 ppb

Maximum absorbance wavelength 2

550/588 nm

550/588 nm

550/588 nm

Appearance

Dark red convex 1.6cm diameter

Clear, dark red aqueous solution

Dark red fine powder

NSF, max use levels in potable water

0.3 ppb

0.8 ppb

0.1 ppb

Weight

1.05 gms ± 0.05

n/a

n/a

Dissolution Time 3

50% < 3 minutes
95% < 6 minutes

Immediately

50% < 3 minutes
95% < 6 minutes

Specific Gravity

n/a

1.03 ± 0.05 @ 25°C

n/a

Viscosity 4

n/a

1.8 cps

n/a

pH

n/a

8.7 ± 0.5 @ 25°C

n/a

Coverage of Products

One Tablet

One Pint Liquid (FWT Red 200)

One Pound Powder

Light Visual (100 ppb)

604 gallons

250,000 gallons

604,000 gallons

Strong Visual (1 ppm)

60 gallons

25,000 gallons

60,400 gallons

How to Use:
How Fluorescent Dye Tracing Products Work: The "visual" aspect of our dye products refers to normal reflection of light as color. The "fluorescent" aspect refers to special properties of some chemicals to absorb certain wavelengths and then emit, rather than reflect, light in response. The emission can be seen by using a "black" ultraviolet light or precisely measured with a fluorometer. The reflected and emitted light have different wavelengths and are, therefore, not the same color.

Fluorescent Properties are of Greatest Value When:

- Tracing must be done when there is no sun or sufficient artificial light (in a sewer or a cave, for instance)

- Precise quantified data is required.

- Very small amounts of tracing material is allowed.

The maximum Absorbance/Emission Wavelengths of Our Products are:

Product Color: Red

Absorption Emission: 550 nm 588 nm  

What Does PPB Mean? Most of our products contain fluorescent dyes, which can be detected visually, or with the use of ultraviolet light or fluorometer. As used in Risk Reactor literature, "ppb" refers to one part of active dye per billion parts of water. Using a fluorometer, the active dye can often be detected at levels less than one ppb. All data is presented as reference points only and should not be regarded as a recommendation. Users should make their own determination of appropriate dilution levels in any specific situation, which will vary with the nature, condition, and use of the water or liquid and the specific evaluation to be performed.


Product Videos

DFTB C7 ()
  • DFTB C7

Product Videos

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the 100 Pack of Fluorescent Red UV Dye Tabs DFTB-C7. to your wish list.

You Recently Viewed...