Product Description: Our Clear Black Black Light Water Based Paint is a durable paint that goes on clear. When under Risk Reactor Black Light activation the film produced by the paint is black but remains clear in regular light. CF1-BK is a special paint used not only for invisible art but also to tone down other black light paint shades.

Use with CF1-C0, CF1-C7, CF1-C6, and CF1-C2 to create hidden art or secret messages. What better way to decorate a room than with invisible paint that will show its color under Risk Reactor Black Light.

Benefits of Risk Reactor's Product:

• Use to tone down black light colors to create shades!
• Can not be found in stores!
• Strong durable acrylic coating!
• Goes on clear!
• Use over existing black light paint to shade or have an invisible black image!
• Cleans up with water!
• Safe and non-toxic!
• Can be used on just about any surface!

Used In:
Theatrical, dorm rooms, arts and crafts, exhibits, displays, hidden image art, youth rooms, bars, night clubs, restaurants, theme parks, and of course fun.

Technical Information:

Film Type: Acrylic
Film Thickness: Produces a 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use soap and water.
Packaging: Gallon, Pint and Ounce Containers.

How to Use:
This product can be used on just about any surface. To see how this paint works, paint a little of the CF1-BK onto a fluorescent surface. The marks you make on the fluorescent surface will remain clear in regular light but when you put a Risk Reactor Black Light over the surface the mark you made will appear black. Prepare the surface as you would with any other type of paint.

• Stir or shake well before use to ensure the fluorescent agent is evenly dispersed in solution.
• For best results apply two coats of white UV undercoat.
• Touch dry within 2 - 4 hours.
• It is recommended that at least 24 hours is allowed between applications, to ensure that all water in the mix has evaporated and, therefore, that each coat is thoroughly dry before the next is applied.
• Do not freeze.
• Clean tools with cold water.
• Seal container after use.
• All colours are intermixable.
• Ensure that all mixes are thoroughly stirred.
• For spraying and to increase coverage: 2 parts paint to 1 part water.
• To increase coverage: 3 parts paint to 1 part CN1 Overcoat.

  For more information please contact sales@riskreactor.com