Risk Reactor Product Code and Name: CP1-06 Invisible Yellow Green Glow in the Dark Paint Water Based.

Description:
Risk Reactor's CP1-06 Yellow Green a glow in the dark water based coating that glows for hours. This paint will glow longer than conventional glow in the dark paint that you can find at most stores.

We engineered this paint to be durable, environmentally friendly, non-radioactive, non-flammable and non-hazardous. It contains less than 60 grams per liter of volatile organic compounds (VOC's) which allows this coating to be used when VOC's are a concern. The film produced after it is fully cured is hard and tough, but yet flexible allowing it to last. The film must be exposed to any light source for a minimum of 14 seconds to rejuvenate the glow (phosphorescent) characteristics.

The stronger the light source the faster and brighter the charge up to a point of saturation. Our glow paint has been used successfully in directional markers, warehouse floors, egress systems, safety markings, theater steps, emergency exits, walkways, just about anywhere you need a luminous marking. Risk Reactor's CP1-06 Yellow Green surpasses existing building codes. This product is used extensively in safety and star murals due to its long after glow duration and because it is a water based paint.

Benefits of Risk Reactor's CP1-06 Yellow Green Glow in the Dark Phosphorescent Paint:

• Waterborne!
• Can be used inside or outside, this paint will not discolor!
• Glow capacity lasts years unlike conventional glow paint!
• Environmentally Safe!
• Can glow up to forty six hours!
• Coating is flexible!
• Safe and non-toxic!
• Cleans up with plain water!
• Perfect for safety applications!
• Used in star murals!
• Non-flammable!
• Interior use or Exterior!

Used In:
Safety applications, egress markings, directional markings, warehouses, star murals, staircases, theaters, stadiums, arenas, buildings, tunnels, dark areas, transportation systems, museums, home safety markings, walls, and walkways.

Technical Information:

Film Type: Acrylic
Film Thickness: Produces a  3 mil. Dry Film.
Glow Time: 46 hours.
Excitation Energy: 200-450 nm
Cautions: Do let the paint freeze, store at room temperature, can be used in areas with direct sunlight.
Coverage: Approximately 350 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use soap and water.
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.

How to Use:
This product can be used on just about any surface. Remove dust, dirt, oils, and other foreign material. To get the maximum glow effect, surface must be primed with a white pigmented primer. Metallic surfaces must be primed with appropriate metal primer. Smooth non-porous surfaces should be abraded for good adhesion. The closer the surface is to white the brighter the phosphorescent color. Black and dark colors tend to absorb light diminishing the phosphorescent effect. The more paint you place on the surface the brighter and longer the glowing effect (up to a point of saturation) so 2-4 coats are recommended. For more information please contact sales@riskreactor.com . Risk Reactor also offers a variety of fluorescent (UV), tracers, dyes, pigments, phosphorescent (GID), and black light products.