Risk Reactor Product Code and Name: CP2-06 Invisible Yellow Green Glow in the Dark Paint Oil Based.

Product Description:
Our CP2-06 Invisible Yellow Green Oil Based glow in the dark paint is a durable coating that glows for days on a single charge. The two glow in the paints that last the longest is the CP2-06 Invisible Yellow Green and the CP2-10 Invisible Turquoise, with the CP2-06 being a little stronger. Most people use both of these for safety applications or where you need the longest glow possible. Another great way to use this product is to prototype your idea. Prototype your idea by painting it first with one of these two paints. Once you do so, you can test the item in real world conditions before investing in making the part. 

Glow in the dark paints absorb ambient light and then re-emits it as visible light. The stronger the light source the faster and brighter the charge up to a point of saturation. Our paint has been used successfully in directional markers, warehouse floors, egress systems, safety markings, theater steps, emergency exits, walkways, just about anywhere you need a luminous marking. Risk Reactor's CP2-06 invisible yellow green surpasses existing building codes.

Benefits of Risk Reactor's CP2-06 Invisible Yellow Green Glow in the Dark Phosphorescent Paint:

• Extremely bright, strong glow!
• Glows for days on a single charge!
• Just about any light source will charge it!
• Excellent water resistance!
• Wear resistant!
• No mixing, stays suspended!
• Strong durable acrylic coating!
• Rechargeable an infinite amount of times!
• Low viscosity!
• Perfect for safety applications!
• Used in star murals!
• Protects paint underneath!
• Cleans up with M.E.K., acetone, xylene, paint thinner, and other solvents!
• Can be used on just about any surface!
• Meets ASTM C1315!
• Non Yellowing!

Used In:
Safety applications, egress markings, directional markings, warehouses, star murals, staircases, theaters, stadiums, arenas, buildings, tunnels, dark areas, transportation systems, museums, home safety markings, walls, and walkways.

Technical Information:

Film Type: Acrylic
Film Thickness: Produces a 2 mil. Dry Film.
Glow Time: > 100 hours.
Emission Wavelength: 523 nm
Excitation Energy: 200-450 nm
Coverage: Approximately 350 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use most solvents such as mineral spirits, xylene, toluene, lacquer thinner, MEK, etc.
Flash Point: 116 F
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.

Time	CP2-06 Yellow Green Glow Paint.
0 minutes	17310
.5 minutes	4658
1 minutes	3122
2 minutes	1925
3 minutes	1403
4 minutes	1102
5 minutes	911
6 minutes	774
7 minutes	670
8 minutes	590
9 minutes	529
10 minutes	478
20 minutes	237
30 minutes	150
40 minutes	109
50 minutes	84
1 hour	67
2 hour	29
3 hour	19
4 hour	13
5 hour	10
6 hour	8
7 hour	7
8 hour	5
9 hour	3
10 hour	6
11 hour	3
12 hour	4
Emission Peak	523 nm
After Glow Time	6800 minutes

How to Use:
This product can be used on just about any surface. Remove dust, dirt, oils, and other foreign material. To get the maximum glow effect, surface must be primed with a white pigmented primer. Metallic surfaces must be primed with appropriate metal primer. Smooth non-porous surfaces should be abraded for good adhesion. The closer the surface is to white the brighter the phosphorescent color. Black and dark colors tend to absorb light diminishing the phosphorescent effect. The more paint you place on the surface the brighter and longer the glowing effect (up to a point of saturation) so 2-4 coats are recommended. You can use stencil to create accurate markings.

For more information please contact sales@riskreactor.com .

Most people who buy the CP2-06 also buy the CP2-10 since they are the two strongest glow in the dark paints.