Fast Glow Paint Product Description:
Risk Reactor's CPZN2-06 is a glow in the dark oil based coating. Use the CPZN2-06 to create luminous surfaces where an image can be made by creating a shadow. You can also use any light source, such as one of our BKEY Keychain UV LEDs to write on the fast glow surface. Our CPZN2-06 is a wonderfully fun paint with a unique characteristic of absorbing light and emitting light quickly. Hence, we call this the Fast Glow Paint, which glows a long time but looses it's energy quickly in the beginning allowing you to create multiple shadows. This paint is also used as a safety paint along with our CP2-06 and CP2-10 Glow in the Dark Paints which have very long glow times.
Our paint has been used successfully in directional markers, warehouse floors, egress systems, safety markings, theater steps, emergency exits, walkways, just about anywhere you need a luminous marking. This product can also be used to create fun coatings such as shadow walls, where a strobe light produces a shadow on the coating. A coating that you can write on with a light pen or LED. Applications are endless.
Benefits of Risk Reactor's CPZN2-06 Yellow Green Glow in the Dark Oil Based Paint:
Can glow up to four hours!
- Strong hard coating!
Great for fishing lures!
Perfect for safety applications!
Used in star murals!
- Protects paint underneath!
Cleans up with M.E.K., acetone, xylene, paint thinner, and other solvents!
Can be used on just about any surface!
Meets ASTM C1315!
Shadow walls in museums and learning centers. Safety applications, egress markings, directional markings, warehouses, staircases, theaters, stadiums, arenas, buildings, tunnels, dark areas, transportation systems, museums, home safety markings, walls, and walkways.
Film Type: Acrylic
Film Thickness: Produces a 2 mil. Dry Film.
Glow Time: > 10 hours.
Coverage: Approximately 350 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use most solvents such as mineral spirits, xylene, toluene, lacquer thinner, MEK, etc.
Flash Point: 116 F
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.
How to Use:
This product can be used on just about any surface. Remove dust, dirt, oils, and other foreign material. To get the maximum glow effect, surface must be primed with a white pigmented primer. Metallic surfaces must be primed with appropriate metal primer. Smooth non-porous surfaces should be abraded for good adhesion. The closer the surface is to white the brighter the phosphorescent color. Black and dark colors tend to absorb light diminishing the phosphorescent effect. The more paint you place on the surface the brighter and longer the glowing effect (up to a point of saturation) so 2-4 coats are recommended. You can use stencil to create accurate markings.
Phosphorescent Shadow Wall Effect:
Museums around the world use this to entertain and to teach people about light. Shadow walls are made with the CPZN1-06 and a flash of light. A wall is usually painted with our fast glow CPZN1-06, more coats give the shadow image more clarity. Use a strobe light or any powerful light is used to charge the wall. The light is turned on for a short time while someone is standing between the light and the wall. This causes a temporary shadow to be produced from the person's shadow, which can be repeated as many times as you wish.
You can also do this on a much smaller scale by utilizing the same techniques described here. Great for school projects and science fairs.
1. Our short glow zinc sulfide paint CPZN1-06 or CPZN2-06. One gallon covers 350 square feet more or less.
2. Dark area or a wall or drape. Something you can apply the paint to.
3. A light source that you can turn on and off. The stronger the light source the most intense the shadow.
Wholesale Glow paint Application:
Paint the wall with the CPZN2-06 paint. The more paint usually the better the result. Place the light source facing the wall. Depending on how big the wall is, you might need multiple lights. Have someone stand in between the light source and the wall before putting the light on for second.
The closer to the wall you stand the more detailed the shadow. You can also do this with any light but you will need to leave the light on longer for a similar result. If you do the latter then you will need to remain still white the light is on, otherwise you will not see a distinct shadow.