Bright White Glowing Paint by Pint CP2-0B1PT

(1 review) Write a Review
16.00 Ounces
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 4 and get 10% off
Buy 5 or above and get 15% off


CP2-0B1PT pint of our CP2-0B Bright White oil based glow in the dark paint is a durable coating that glows for days on a single charge. Glow in the dark paints absorbs ambient light and then re-emits it as visible light.

The stronger the light source the faster and brighter the charge up to a point of saturation. Our paint has been used successfully in directional markers, warehouse floors, egress systems, safety markings, theater steps, emergency exits, walkways, just about anywhere you need a luminous marking. Risk Reactor's CP2-0B Bright White surpasses existing building codes.

Benefits of Risk Reactor's CP2-0B1PT Bright White Glow in the Dark Phosphorescent Paint:

  1. Very special violet color that is amazing to see!
  2. No mixing, stays suspended!
  3. Extremely bright, strong glow!
  4. Just about any light source will charge it!
  5. Excellent water resistance!
  6. Wear resistant!
  7. Strong durable acrylic coating!
  8. Rechargeable an infinite amount of times!
  9. Low viscosity!
  10. Perfect for safety applications!
  11. Used in star murals!Protects paint underneath!
  12. Cleans up with M.E.K., acetone, and other solvents!
  13. Can be used on just about any surface!
  14. Meets ASTM C1315!
  15. Non Yellowing!

Used In:
Safety applications, art projects, urethane, plastic molding, egress markings, directional markings, warehouses, star murals, staircases, theaters, stadiums, arenas, buildings, tunnels, dark areas, transportation systems, museums, home safety markings, walls, and walkways.

Technical Information:

Film Type: Acrylic
Film Thickness: Produces a 2 mil. Dry Film.
Glow Time: Approx. 2 hours.
Emission Wavelength: 443 nm
Excitation Energy: 200-450 nm
Coverage: Approximately 350 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use most solvents such as mineral spirits, xylene, toluene, lacquer thinner, MEK, etc.
Flash Point: 116 F
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.

How to Use:
This product can be used on just about any surface. Remove dust, dirt, oils, and other foreign material. To get the maximum glow effect, surface must be primed with a white pigmented primer. Metallic surfaces must be primed with appropriate metal primer. Smooth non-porous surfaces should be abraded for good adhesion. The closer the surface is to white the brighter the phosphorescent color. Black and dark colors tend to absorb light diminishing the phosphorescent effect. The more paint you place on the surface the brighter and longer the glowing effect (up to a point of saturation) so 2-4 coats are recommended. You can use stencil to create accurate markings.

View AllClose

1 Review

  • 5
    Best glow paint I have Found

    Posted by SRG Lures on 19th Feb 2015

    I have a lure business and produces specialty glow lures. While the Risk Reactor oil base glow paints requires an extra effort to learn how to use, they certainly produce the exceptional results that my customers prefer. I am very happy with all of the oil base glow paints that I have purchased from the Risk reactor business.

View AllClose