Our IF2-BK Clear Black all purpose marking ink is a durable ink that goes on water clear. When under our black light activation, the film produced by the ink will look black but still remain clear in regular light. You can also use this ink to remove an existing invisible fluorescent mark. This is used in marking items such as tools, machines, retail goods, and anything non-porous. You can also thin the product even more, but is not recommended unless you test the application first. Once applied the ink is very hard and usually impossible to get off without damaging the part. This allows the user to easily identify manipulated items. Use with our battery operated black lights for use everywhere on our planet.
Benefits of Risk Reactor's IF2-BK Clear Black Marking Ink:
Goes on clear!
Portable security solution when used with our battery operated blacklights!
Creates a black mark under long wave black light!
- Strong durable ultra-thin coating!
Easy to apply!
Cleans up with MEK, acetone, xylene, paint thinner, and other solvents!
Meets ASTM C1315!
Can be used on just about any surface!
Mark tools, wood, metal, parts, machines, some plastics, anything that you need a permanent invisible fluorescent mark. Identify your items using our Prevent theft, or catch a theif, by marking your property. Used in home and industries alike. Use a Risk Reactor Black Light to see the invisible marks to prove ownership on the spot.
Film Type: Acrylic
Film Thickness: Produces a very ultra-thin film.
Coverage: Depends on application method
Drying Time: At 75°F (24°C), it dries to the touch in about 3 minutes. Cleaning Up: Use most solvents such as mineral spirits, xylene, toluene, lacquer thinner, MEK, etc.
Flash Point: 116 F
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.
How to Use:
This product can be used on just about any surface. Always test first before applying in large quantities. Use a brush or other device to apply the ink. You can also dip the item or roll the ink on. Use a stencil to create shapes or letters that will uniquely identify the item. The mark is invisible until you use a long wave black light to view. Since the solvents used are flammable be careful of any open flame and make sure the area is ventilated.