Box of 12 Refill Aluminum UV Marker Pens MRA-X12

(No reviews yet) Write a Review
SKU:
MRA-X12
UPC:
802074003983
Weight:
12.00 Ounces
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 10 and get 10% off
Buy 11 - 20 and get 15% off
Buy 21 or above and get 20% off
  • Wholesale refillable pens MRA-X12with large UV ink capacity tank
  • Use the refill Ultra Violet pen MRA-X12 for your invisible marking needs.
  • Box of twelve MRA-X12 different types of nibs can be changed on the MRA-X perfect for your project.
  • The large reservoir allows you to mark for a long time before refilling for the box of 12 MRA-X12.
  • Four types of replacement nibs for the MRA-X12 refill pen are available.
  • MRA-X12 Metal pen that can be filled again and again with various inks
  • End cap comes off the MRA-X12 to fill pen from the stern use with our black light fluorescent inks
MSRP: $249.45
$198.68
— You save $50.77

Description

MRA-X12 Box of 12 of Risk Reactor's MRA-X is a precision machined, valve action, refillable marker. These markers are manufactured from high-grade aluminum alloys and feature a precision valve with an O-ring seal which feeds ink when the tip is depressed. A threaded cap on the barrel is removed for filling.

Our MRA-X Aluminum Refillable Pen is a pocket size marker. This marker is constructed from precision machined, anodized aluminum components and can be completely disassembled for cleaning and repair. A pocket clip is snapped onto the slip cap so it’s with you when you need it. To insure the valve won’t leak during operation we use a special chemical resistant o-ring.

We also carry replaceable felt tips with 3 different ones to choose from. Round, Chisel, Fine Line Round and Fine Line Chisel. Click here to see the data sheet on these products.

Inking Instructions for MRA-X12
1. Unscrew end cap from aluminum handle.
2. Pour ink into the aluminum handle to within approximately 1/2" of the top. Do not overfill!
3. Screw end cap back on to aluminum handle.
4. Remove slip cap to expose tip.
5. Hold the pen with the felt tip pointing up and press the tip down with your finger to let air escape. This prevents flooding of tip and should be done after each filling and before using if pen is stored in a hot location. Note: If tip is inked, wear rubber gloves.

6. To start ink flow, hold the MRA-X pen in the writing position and with a quick motion, press down on the tip and release. Repeat this motion until you see the ink start to appear in the exposed tip. Let the ink finish wicking before pressing down on the tip again. Do not over saturate the tip as flooding will occur.

7. Keep the slip cap on the MRA-X pen when not in use to prevent the tip from drying out.

8. To replace the flet tip remove the old tip by unscrewing and pulling the tip at the same time. Push the new tip into the nozzle until it stops then screw it in a few turns more.

Invisibility is obtained by having the right product for your surface and color, which may require you to try various colors and types to find the right one. Choose our complete I.D. Kits to save you money, by providing all the colors per the various surface types. We can also create new ink formulations for your specific need. First, try the off-the-shelf products, then contact us with your modification specifications if necessary.

Refillable Metal Solvent Safe Pens and Replacement Nibs.

Refillable black light pen that can be used with any type of marking ink  Refillable Pens that come blank, no ink. Ready for your project or application. The pen is made out of medal and can be reused.

MRA-X Single Units  Box of 6 MRA-X Box of 12 MRA-X  Box of 100 MRA-X
 Replacement nibs for the MRA-X Refillable Pen with different points. The nibs come 12 to a pack. The number MRATIP-2 is Round Tip Point, MRATIP-4 is the Chisel Point, MRATIP-6 Fine Line Point, MRATIP-8 Fine Line Chisel Point

Replacement nib for MRA-X refillable pens.

MRATIP-2

 Dozen of MRA-X replacement UV nibs.

MRATIP-4

MRATIP-6 fine tipped nibs for the MRA-X refill UV Pen.

MRATIP-6 

 Fine chisel pointed felt nibs to any ink.MRATIP-8

Our Invisible Fluorescent Marking Pens are fast, easy, and a convenient way to invisibly mark items. Perfect for retail stores, manufacturing processes, quality control, retail, ownership, and anywhere you may need to mark an item quickly and invisibly. Using our 6" Hand Held Battery Operated Black Light to view the marks allows you to have a portable system.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose