Loading... Please wait...

Categories

Our Newsletter


PPSB-24 Ounce of Light Green Glow Pigment

  • Light green in regular light and glows in the dark light green as well.
RRP:
$18.86
Your Price:
$14.86 (You save $4.00)
SKU:
PPSB_24_1oz
Weight:
1.50 Ounces
Shipping:
Calculated at checkout
Quantity:


Product Description

Risk Reactor's PPSB-24 Light Green Glow in the Dark pigment was developed to go into oil based mediums. Phosphorescent pigment is the basic building block for material that glows in the dark.

It works by absorbing ambient light and then re-emitting it in the visible spectrum. This process can be repeated an infinite amount of times. The color visible in regular light is an off white and it will glow a vibrant Light Green in the dark. You can mix this pigment into any clear medium such as glue, paint, caukling, wax, clay, gel candles, liquid nails, silicone, urethane, you name it. This pigment is best used right after mixing, most mediums seem to gel with this pigment over a period of time.

Benefits of Risk Reactor's PPSB-24 Light Green Pigment:

  • Looks Light Green and glows Light Green!
  • Used extensively for fishing lures and decorative items!! 
  • Product can last more than 15 years, unlike conventional pigment!
  • Just about any light will charge it!
  • Glows a strong Light Green!
  • Non-radioactive!
  • Safe and non-toxic!
  • Can be used with just about any non-aqueous medium!
  • Charges an infinte amount of times!

Used In:
Clock & watch dials, paint, electronic instrument dial pads, poly urethane, home appliances, lighting apparatus and switches, exit signs, emergency signage and low level lighting escape systems (Egress Systems), shoes, caps, aircraft and automobile dials and instrument panels, firemen's equipment, traffic signs & high visibility signs, fishing equipment, military applications, outdoor path marking, camping equipment, textile printing and textile fibers, writing & printing inks, You can use this product anywhere a long afterglow and/or light fastness is needed.

Technical Information:

Appearance:Red/No Order
Melting Point: Dissociates 1200 C
Excitation Energy: 200-450 nm
Emission Wavelength: nm
Vapor Pressure: N/AP
Vapor Density: N/AP
Solubility In Water: soluble
Weight Per Cube Meter: 2.5-3.1
Chemical ID: Alkaline Earth Metal Sulfide Europium Doped 
Flammability Class: N/AP
Extinguishing Media: Water
Specific Gravity: 2.5-3.1
Freezing Point: N/AP
Percent Volatile: N/AP
Evaporation Rate: N/AP
pH (% in water): N/AP
Flash Point: N/AP
Auto-Ignition Temp: N/AP.

Note: This pigment should not be exposed to any water including humidity. If it does, it will eventually breakdown and you will loose about 20% of the glowing capacity. Store in a cool dry place.

Glow Time Chart Measured in mcd/m2

The afterglow brightness is measured under D65 standard light source excited by 1000 lux for 10 minutes. The excitation wavelength is 253.7 nm. The instrument to determine brightness LS-100. As a general rule, the larger the particle size the greater and longer the glow. The threshold of the human eye to detect light is .32 mcd/m2 with a dark adapted eye.

Time

PPSB-24 (10-20 um)

0 minutes

1193

.5 minutes

469

1 minutes

338

2 minutes

219

3 minutes

163

4 minutes

129

5 minutes

107

6 minutes

90

7 minutes

79

8 minutes

68

9 minutes

62

10 minutes

55

20 minutes

26

30 minutes

19

40 minutes

14

50 minutes

10

1 hour

9

2 hour

4

3 hour

2

4 hour

0

5 hour

0

6 hour

0

7 hour

0

8 hour

0

9 hour

0

10 hour

0

11 hour

0

12 hour

0

Emission Peak

 nm

After Glow Time

 150 minutes

How to Use
This product is easy to work with. Simply mix it with a clear medium such as clear paint, clear glue, clear wax, etc. and you will have a glowing material! Follow the guidelines below to ensure you maximize the glowing effectiveness of our products.

  1. More powder, higher percentage will produce brighter, longer glow.
  2. Use a white, or light color as a background for best results. Any color other than white will diminish glow.
  3. Use the clearest vehicle possible. Any pigment in the vehicle will decrease the brightness and length of glow.
  4. The thicker (to a point) the layer of Glow Powder will produce longer and brighter luminosity.
  5. Try to prevent moisture in the manufacturing process.
  6. Do not use vehicle with high acidity.
  7. Do not grind the Glow Powder, it will destroy the crystal structure and therefore decrease luminosity.
  8. The larger the particle size of the Glow Powder the greater the glow.
  9. Ratio of Glow Powder to medium is from 10% to 50% by weight depending on application and manufacture process. Best to start with 30% and move and down depending on cost, manufacturing process, and other factors that are unique to your application.

Product Videos

PPSB 24 ()
  • PPSB 24

Product Videos

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the PPSB-24 Ounce of Light Green Glow Pigment to your wish list.

You Recently Viewed...