CF2-C01OZ Clear Jellyfish UV Blue Black Light Paint by Ounce

(1 review) Write a Review
2.00 Ounces
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 9 and get 10% off
Buy 10 - 20 and get 15% off
Buy 21 or above and get 20% off
  • CF2-C01OZ ounce of invisible neon blue paint under black light
  • Invisible blue CF2-C01OZ black light fluorescent paint by the ounce
  • The clear blue CF2-C01OZ paint is made in USA, buy American today
  • Ounce of CF2-C01OZ of invisible blue fluorescent paint
  • Black light invisible blue oil based paint CF2-C01OZ
  • Bottom view of the CF2-C01OZ ounce UV paint


Part number CF2-C01OZ is one ounce of the Clear Jellyfish Blue Black Light Paint

CF2-C01OZ  goes on absolutely clear and produces a hard glass like surface. The difference between using a water based paint and the paint will be the strength and type of coating. The oil based black light paints create a hard glass like surface. Fishing lures and other items that take a beating need to use our oil based paints such as our CF2-C0 Clear Jellyfish Blue. When under Risk Reactor black light activation, the film produced by the paint fluoresces a strong, bright, blue.

Benefits of Risk Reactor's CF2-C01OZ Clear Blue Oil Based Black Light Paint:

Clear Jellyfish Blue is an intense blue under Risk Reactor black light but yet clear in regular light!
Excellent water resistance!
Wear resistant!
Perfect for mixing with our other oil based paints!
Strong durable coating, think of it like fingernail polish.
Goes on water clear only shows color under black light.
Low viscosity!
Use as a base for making your own paint!
Protects paint underneath!
Cleans up with MEK, acetone (fingernail polish remover), and other solvents!
Can be used on just about any cleaned surface.
Meets ASTM C1315 requirements.
Non Yellowing!

CF2-C01OZ Technical Information:

Film Type: Acrylic
Film Thickness: Produces a 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use most solvents such as mineral spirits, xylene, toluene, lacquer thinner, MEK, etc.
Flash Point: 116 F
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.

How to Use the CF2-C01OZ:
This product can be used on just about any surface. The closer the surface is to white the brighter the fluorescent color. Black and dark colors tend to absorb light diminishing the fluorescent effect. Prepare the surface as you would with any other type of paint. This is a oil based paint so check for adhesion, dissolving, etc. on small section before painting the entire surface. Work in a well ventilated room when using any oil based paint.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose

1 Review

  • 5

    Posted by Unknown on 21st Jul 2015

    just what i wanted

View AllClose