Description
Part number CN11PT is one pint of clear water based paint for mixing any of our glow in the dark or fluorescent pigments.
Our Clear Water Based Overcoat is a durable paint that goes on clear. Does not contain UV inhibitors allowing our under paints glow and fluoresce brightly. For glow in the dark pigments such as PPSB-06 use 30% by weight. Or for the pint to make the whole thing, use around 200 grams. If you are mixing black light pigments such as PF-18 yellow tang then use much less 88 grams.
Benefits of Risk Reactor's CN11PT Clear Overcoat Base Paint Pint:
- Strong durable, clear, acrylic coating for mixing glow powders.
- Goes on clear to protect under coatings.
- Use as a base for making your own paint!
- Wear and mar resistant!
- Protects paint underneath!
- Cleans up with water!
- Safe and non-toxic!
- Can be used on just about any surface!
Used In:
To protect and enhance Risk Reactor's luminous paints. Also can be used as a base to make your own paints with our fluorescent and phosphorescent pigments.
Technical Information:
Film Type: Acrylic
Film Thickness: Produces a 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use soap and water.
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.
How to Use CN11PT:
Spray, brush, etc. our CN1 over our luminous paints to enhance the color and protect the fluorescent or phosphorescent effect. To mix your own paint, use one of Risk Reactor's Pigments and/or dyes and simply stir into the CN1. This product can be used on just about any surface. Prepare the surface as you would with any other type of paint.
