CN21GAL One Gallon Clear Over coat Oil Based Paint for Mixing Pigments

(No reviews yet) Write a Review
128.00 Ounces
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 4 and get 10% off
Buy 5 - 9 and get 15% off
Buy 10 or above and get 20% off
  • CN21GAL One Gallon Clear Over coat Oil Based Paint for Mixing Pigments
  • CN2GAL Oil based clear base coating especially made for mixing with our fluorescent and phosphorescent pigments
  • Colorless oil medium for mixing glow in the dark powders by the gallon
  • Clear mixing medium  in gallon CN21GAL for fluorescent pigments
  • Our oil based clear extender for mixing fluorescent colorants CN21GAL
MSRP: $99.34
— You save $19.46


CN21GAL Clear Overcoat is an Oil Based durable paint that goes on absolutely clear. Does not contain any inhibitors allowing our under paints glow and fluoresce brightly. Wonderful product to use as a base for mixing Risk Reactor's Glow in the Dark and Fluorescent Pigments. 

Benefits of Risk Reactor's CN2 Clear Overcoat Paint:

  1. Wear resistant!
  2. Strong durable acrylic coating!
  3. Goes on absolutely clear!
  4. Low viscosity!
  5. Use as a base for making your own paint!
  6. Protects paint underneath!
  7. Cleans up with M.E.K., acetone, xylene, paint thinner, and other solvents!
  8. Can be used on just about any surface!
  9. Meets ASTM C1315!
  10. Non Yellowing!

Used In:
To protect and enhance Risk Reactor's luminous paints. Also can be used as a base to make your own paints with our fluorescent and phosphorescent pigments.

Technical Information:

Film Type: Acrylic.
Film Thickness: Produces a 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon.
Drying Time: At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use most solvents such as acetone, MEK, etc.
Flash Point: 116 F
Shelf Life: Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.

How to Use:
Spray, brush, etc. our CN2 over our luminous paints to enhance the color and protect the fluorescent or phosphorescent effect. This product can be used on just about any surface. Prepare the surface as you would with any other type of paint.

To mix your own paint, simply add one of our pigments and or dyes to the CN2 and stir. You can thin the CN2 with M.E.K., Acetone and many other organic solvents. This is an oil-based paint and proper ventilation is recommended.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose