CPZN1-061OZ Ounce of Quick Charging and Fast Glowing Water Based Paint

(No reviews yet) Write a Review
SKU:
CPZN1-061OZ
UPC:
802074006922
Weight:
2.00 Ounces
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 4 and get 10% off
Buy 5 - 8 and get 15% off
Buy 9 or above and get 20% off
  • CPZN1-061OZ Ounce of Quick Charging and Fast Glowing Water Based Paint
  • Phosphorescent fast green CPZN1-061OZ glow paint in ounce
  • Fast glow green CPZN1-061OZ  acrylic paint
  • CPZN1-061OZ Test size of the water based fast green glow in the dark paints
  • Photo-luminescent green paint CPZN1-061OZ that charges quick and emits light fast
  • Our CPZN1-061OZ  ounce paint is made in America
MSRP: $19.67
$12.89
— You save $6.78

Description

Part number CPZN1-061OZ Shadow Wall Glow in the Dark Water Based Paint Product Description:

Risk Reactor's CPZN1-06 is a glow in the dark water based coating. Use the CPZN1-06 to create luminous surfaces where an image can be made by creating a shadow. You can also use any light source, such as one of our BKEY Keychain UV LEDs to write on the fast glow surface. Our CPZN1-06 is a wonderfully fun paint with a unique characteristic of absorbing light and emitting light quickly. Hence, we call this the Fast Glow Paint, which glows a long time but looses it's energy quickly in the beginning allowing you to create multiple shadows. This paint is also used as a safety paint along with our CP2-06 and CP2-10 Glow in the Dark Paints which have very long glow times.

We engineered this paint to be durable, environmentally friendly, non-radioactive, non-flammable and non-hazardous. It contains less than 60 grams per liter of volatile organic compounds (VOC's) which allows this coating to be used when VOC's are a concern. The film produced after it is fully cured is hard and tough, but yet flexible allowing it to last. The film must be exposed to any light source for a minimum of 14 seconds to rejuvenate the glow (phosphorescent) characteristics. Our paint has been used successfully in directional markers, warehouse floors, egress systems, safety markings, theater steps, emergency exits, walkways, just about anywhere you need a luminous marking. This product can also be used to create fun coatings such as shadow walls, where a strobe light produces a shadow on the coating. A coating that you can write on with a light pen or LED. Applications are endless.

Benefits of Risk Reactor's CPZN1-061OZ Yellow Green Glow in the Dark Phosphorescent Paint:

  1. The CPZN1-061OZ fast green is environmentally safe to use and to clean.
  2. Can glow all night on a single charge.
  3. Acrylic glow green coating is flexible and permanent.
  4. Our water based paints are safe and non-toxic for everyone!
  5. Will glow over and over again for years.
  6. Cleans up with plain water!
  7. Non-flammable because it is waterborne!
  8. Interior use and for exterior use!

The CPZN1-061OZ quick glow green phosphorescent paints is used in:

Clients use this for star murals in their bedroom along with our new series of super glow in the dark stickers. Shadow walls in museums and learning centers. Safety applications, egress markings, directional markings, warehouses, staircases, theaters, stadiums, arenas, buildings, tunnels, dark areas, transportation systems, museums, home safety markings, walls, and walkways.

CPZN1-061OZ Technical Information:

Film Type: Acrylic
Film Thickness: Produces a 
3 mil. Dry Film.
Glow Time: 4 hours.
Cautions: Do let the paint freeze, store at room temperature, do not use in areas with direct sunlight.
Coverage:
Approximately 350 sq. ft. per gallon.
Drying Time:
At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use s
oap and water.
Shelf Life:
Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.

How to Use Glow in the Dark Paints:

This product can be used on just about any surface. Remove dust, dirt, oils, and other foreign material. To get the maximum glow effect, surface must be primed with a white pigmented primer. Metallic surfaces must be primed with appropriate metal primer. Smooth non-porous surfaces should be abraded for good adhesion. The closer the surface is to white the brighter the phosphorescent color. Black and dark colors tend to absorb light diminishing the phosphorescent effect. The more paint you place on the surface the brighter and longer the glowing effect (up to a point of saturation) so 2-4 coats are recommended. You can use stencil to create accurate markings.

Phosphorescent Green Shadow Wall Effect:

Museums around the world use this to entertain and to teach people about light. Shadow walls are made with the CPZN1-06 and a flash of light. A wall is usually painted with our fast glow CPZN1-06, more coats give the shadow image more clarity. Use a strobe light or any powerful light is used to charge the wall. The light is turned on for a short time while someone is standing between the light and the wall. This causes a temporary shadow to be produced from the person's shadow, which can be repeated as many times as you wish.

You can also do this on a much smaller scale by utilizing the same techniques described here. Great for school projects and science fairs.

You Need:

1. Our short glow zinc sulfide paint CPZN1-06. One gallon covers 350 square feet more or less.

2. Dark area or a wall or drape. Something you can apply the paint to.

3. A light source that you can turn on and off. The stronger the light source the most intense the shadow.

Application:

Paint the wall with the CPZN1-06 paint. The more paint usually the better the result. Place the light source facing the wall. Depending on how big the wall is, you might need multiple lights. Have someone stand in between the light source and the wall before putting the light on for second.

The closer to the wall you stand the more detailed the shadow. You can also do this with any light but you will need to leave the light on longer for a similar result. If you do the latter then you will need to remain still white the light is on, otherwise you will not see a distinct shadow.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose