CP2-061OZ Ounce Invisible Yellow Green Glow in the Dark Paint

(No reviews yet) Write a Review
2.00 Ounces
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 4 and get 10% off
Buy 5 - 9 and get 15% off
Buy 10 or above and get 20% off
  • CP2-061OZ Ounce Invisible Yellow Green Glow in the Dark Paint
  • Phosphorescent green glow paint in ounce CP2-061OZ
  • CP2-061OZ ounce of glowing green oil based paint
  • Photo charging glow paint green CP2-061OZ by ounce
  • Glow yellow green glow paint CP2-061OZ by the ounce


CP2-061OZ ounce of our CP2-06 Invisible Yellow Green Oil Based strontium glow in the dark paint is a durable coating that glows for days on a single charge. The two glow in the paints that last the longest is the CP2-06 Invisible Yellow Green and the CP2-10 Invisible Turquoise, with the CP2-06 being a little stronger. Most people use both of these for safety applications or where you need the longest glow possible. Another great way to use this product is to protoype your idea. Prototype your idea by painting it first with one of these two paints. Once you do so, you can test the item in real world conditions before investing in making the part. 

Glow in the dark paints absorb ambient light and then re-emits it as visible light. The stronger the light source the faster and brighter the charge up to a point of saturation. Our paint has been used successfully in directional markers, warehouse floors, egress systems, safety markings, theater steps, emergency exits, walkways, just about anywhere you need a luminous marking. Risk Reactor's CP2-06 invisible yellow green surpasses existing building codes.

Benefits of Risk Reactor's CP2-061OZ Invisible Yellow Green Glow in the Dark Phosphorescent Paint:

  1. Glows for days on a single charge!Extremely bright, strong glow!
  2. Just about any light source will charge it!
  3. Excellent water resistance!
  4. Wear resistant!
  5. No mixing, stays suspended!
  6. Strong durable acrylic coating!
  7. Rechargeable an infinite amount of times!
  8. Low viscosity!
  9. Perfect for safety applications!
  10. Used in star murals!Protects paint underneath!
  11. Cleans up with M.E.K., acetone and other solvents!
  12. Can be used on just about any surface!
  13. Meets ASTM C1315!
  14. Non Yellowing!

Used In:
Safety applications, egress markings, directional markings, warehouses, star murals, staircases, theaters, stadiums, arenas, buildings, tunnels, dark areas, transportation systems, museums, home safety markings, walls, and walkways.

Technical Information:

Film Type: Acrylic
Film Thickness: Produces a
2 mil. Dry Film.
Glow Time: > 100 hours.
Emission Wavelength: 523 nm
Excitation Energy: 200-450 nm
Approximately 350 sq. ft. per gallon.
Drying Time:
At 75°F (24°C), it dries to the touch in about 30 minutes. Can be recoated in 1-2 hours.
Cleaning Up: Use most solvents such as mineral spirits, xylene, toluene, lacquer thinner, MEK, etc
Flash Point: 116 F
Shelf Life:
Minimum 24 months.
Packaging: Gallon, Pint and Ounce Containers.


CP2-06 Yellow Green Glow Paint.

0 minutes


.5 minutes


1 minutes


2 minutes


3 minutes


4 minutes


5 minutes


6 minutes


7 minutes


8 minutes


9 minutes


10 minutes


20 minutes


30 minutes


40 minutes


50 minutes


1 hour


2 hour


3 hour


4 hour


5 hour


6 hour


7 hour


8 hour


9 hour


10 hour


11 hour


12 hour


Emission Peak

523 nm

After Glow Time

6800 minutes

How to Use:
This product can be used on just about any surface. Remove dust, dirt, oils, and other foreign material. To get the maximum glow effect, surface must be primed with a white pigmented primer. Metallic surfaces must be primed with appropriate metal primer. Smooth non-porous surfaces should be abraded for good adhesion. The closer the surface is to white the brighter the phosphorescent color. Black and dark colors tend to absorb light diminishing the phosphorescent effect. The more paint you place on the surface the brighter and longer the glowing effect (up to a point of saturation) so 2-4 coats are recommended. You can use stencil to create accurate markings.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose