PPSB-191KG One Kilogram of Orange Red Glow Pigment

Description
Warranty Information

Description

To Reorder Use Part Number PPSB-191KG which is one kilogram of Risk Reactor Inc.'s Reddish Orange powder.

SPECIAL DEAL! Buy four kilograms of any PPSB, PPWB, PPZNBB-06 Series colors and get FREE SHIPPING! Use the code: PPSBKG4

The PPSB-191KG is 2.2 pounds of Orange Red Glow in the Dark pigment was developed to go into oil based mediums. Phosphorescent pigment is the basic building block for material that glows in the dark. It works by absorbing ambient light and then re-emitting it in the visible spectrum. This process can be repeated an infinite amount of times. The color visible in regular light is an off white and it will glow a vibrant Orange Red in the dark. You can mix this pigment into any clear medium such as glue, paint, caulking, wax, clay, gel candles, liquid nails, silicone, urethane, you name it. This pigment is best used right after mixing, most water based mediums seem to gel with this pigment over a period of time.

Benefits of Risk Reactor's PPSB-191KG Orange Red Pigments:

Looks Orange Red and glows Orange Red!
Used extensively for fishing lures and decorative items!!
Product can last more than 15 years, unlike conventional pigment!
Just about any light will charge it!
Glows a strong Orange Red!
Non-radioactive!
Safe and non-toxic!
Can be used with just about any non-aqueous medium!
Charges an infinte amount of times!

Reddish Orange Phosphorescent Colorants are Used In:

Clock & watch dials, paint, electronic instrument dial pads, poly urethane, home appliances, lighting apparatus and switches, exit signs, emergency signage and low level lighting escape systems (Egress Systems), shoes, caps, aircraft and automobile dials and instrument panels, firemen's equipment, traffic signs & high visibility signs, fishing equipment, military applications, outdoor path marking, camping equipment, textile printing and textile fibers, writing & printing inks, You can use this product anywhere a long afterglow and/or light fastness is needed.

Technical Information:

Appearance:Red/No Order
Melting Point: Dissociates 1200 C
Excitation Energy: 200-450 nm
Emission Wavelength: nm
Vapor Pressure: N/AP
Vapor Density: N/AP
Solubility In Water: soluble
Weight Per Cube Meter: 2.5-3.1
Chemical ID: Alkaline Earth Metal Sulfide Europium Doped
Extinguishing Media: Water
Specific Gravity: 2.5-3.1
Freezing Point: N/AP
Percent Volatile: N/AP
Auto-Ignition Temp: N/AP.

Glow Time Chart Measured in mcd/m2 The afterglow brightness is measured under D65 standard light source excited by 1000 lux for 10 minutes. The excitation wavelength is 253.7 nm. The instrument to determine brightness LS-100. As a general rule, the larger the particle size the greater and longer the glow. The threshold of the human eye to detect light is .32 mcd/m2 with a dark adapted eye.

Time	PPSB-191KG (10-20 um)
0 minutes	3000
.5 minutes	696
1 minutes	455
2 minutes	267
3 minutes	189
4 minutes	147
5 minutes	119
6 minutes	101
7 minutes	87
8 minutes	76
9 minutes	70
10 minutes	60
20 minutes	30
30 minutes	20
40 minutes	15
50 minutes	11
1 hour	7
2 hour	0
3 hour	0
4 hour	0
5 hour	0
6 hour	0
7 hour	0
8 hour	0
9 hour	0
10 hour	0
11 hour	0
12 hour	0
Emission Peak	nm
After Glow Time	210 minutes

How to Use
This product is easy to work with. Simply mix it with a clear medium such as clear paint, clear glue, clear wax, etc. and you will have a glowing material! Follow the guidelines below to ensure you maximize the glowing effectiveness of our products. Note: This pigment should not be exposed to any water including humidity. If it does, it will eventually breakdown and you will loose about 20% of the glowing capacity. Store in a cool dry place.

More powder, higher percentage will produce brighter, longer glow.

Use a white, or light color as a background for best results. Any color other than white will diminish glow.

Use the clearest vehicle possible. Any pigment in the vehicle will decrease the brightness and length of glow.

The thicker (to a point) the layer of Glow Powder will produce longer and brighter luminosity.

Try to prevent moisture in the manufacturing process.

Do not use vehicle with high acidity.

Do not grind the Glow in the Dark Pigment, it will destroy the crystal structure and therefore decrease luminosity.

The larger the particle size of the Glow in the Dark Pigmentthe greater the glow.

Ratio of Glow in the Dark Pigment to medium is from 10% to 50% by weight depending on application and manufacture process. Best to start with 30% and move and down depending on cost, manufacturing process, and other factors that are unique to your application.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.

View AllClose