PPSB-031OZ Invisible Orange Glow in the Dark Pigment by the ounce

(No reviews yet) Write a Review
1.00 Ounces
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 5 and get 10% off
Buy 6 or above and get 15% off
MSRP: $29.99
— You save $11.00


PPSB-031OZ Risk Reactor's Invisible Orange Glow in the Dark pigment powder was developed to go into oil or water based mediums. Phosphorescent pigment is the basic building block for material that glows in the dark.

It works by absorbing ambient light and then re-emitting it in the visible spectrum. This process can be repeated an infinite amount of times. The color visible in regular light is an off white and it will glow a vibrant Orange in the dark. This "change" of color is why we refer to it as invisible. You can mix this pigment into any clear medium such as glue, paint, caukling, wax, clay, gel candles, liquid nails, silicone, urethane, you name it.

Benefits of Risk Reactor's PPSB-03 Invisible Orange Pigment:

Easy to work with!
Long afterglow lasting pigment! 
Product can last more than 15 years, unlike conventional pigment!
Just about any light will charge it!
Glows a strong Orange!
Safe and non-toxic!
Can be used with just about any medium!
Charges an infinte amount of times!

Used In:
Clock & watch dials, paint, electronic instrument dial pads, poly urethane, home appliances, lighting apparatus and switches, exit signs, emergency signage and low level lighting escape systems (Egress Systems), shoes, caps, aircraft and automobile dials and instrument panels, firemen's equipment, traffic signs & high visibility signs, fishing equipment, military applications, outdoor path marking, camping equipment, textile printing and textile fibers, writing & printing inks, You can use this product anywhere a long afterglow and/or light fastness is needed.

Technical Information:

Appearance: White Powder/No Order
Melting Point: Dissociates 600 C
Excitation Energy: 200-450 nm
Emission Wavelength: 624 nm
Vapor Pressure: N/AP
Vapor Density: N/AP
Solubility In Water: Insoluble
Weight Per Cube Meter: 5.1
Chemical ID: Y2O2S:Eu
Flammability Class: N/AP
Extinguishing Media: Water
Specific Gravity: 5.1
Freezing Point: N/AP
Percent Volatile: N/AP
Evaporation Rate: N/AP
pH (% in water): N/AP
Flash Point: N/AP
Auto-Ignition Temp: N/AP.

Glow Time Chart Measured in mcd/m2

The afterglow brightness is measured under D65 standard light source excited by 1000 lux for 10 minutes. The excitation wavelength is 253.7 nm. The instrument to determine brightness LS-100. As a general rule, the larger the particle size the greater and longer the glow. The threshold of the human eye to detect light is .32 mcd/m2 with a dark adapted eye.


PPSB-03 (14-40 um)

0 minutes


.5 minutes


1 minutes


2 minutes


3 minutes


4 minutes


5 minutes


6 minutes


7 minutes


8 minutes


9 minutes


10 minutes


20 minutes


30 minutes


40 minutes


50 minutes


1 hour


2 hour


3 hour


4 hour


5 hour


6 hour


7 hour


8 hour


9 hour


10 hour


11 hour


12 hour


Emission Peak

624 nm

After Glow Time

720 minutes

How to Use
This product is easy to work with. Simply mix it with a clear medium such as clear paint, clear glue, clear wax, etc. and you will have a glowing material! Follow the guidelines below to ensure you maximize the glowing effectiveness of our products. 

When ordering glow in the dark pigments to mix into paint, you may question how can I create my own paint with these fascinating pigments? How should I mix the pigments and in what material should I put them? The best way to go about the mixing process is to do a test run.  This way gets you familiar with the materials and is actually quite fun!  It also is a way to test how the paint will work in your surroundings and for your application.  Start off using just a little pigment to mix into your base, you can add more as you go.  Remember to find a good mixing tool; the pigment will have to be mixed thoroughly so it separates from itself.  Keep in mind: pigment will not dissolve, so give it a really good stir!

Risk Reactor offers two easy solutions for your glow paint base:
CN1 Water Based Clear and CN2 Oil Based Clear Overcoat.  Depending on if you need an oil or water base, these two products will work perfectly with Risk Reactor pigments. 
There are some basic procedures and rules that one would want to follow when mixing pigments:

If you use more powder, it will illuminate more for a longer time.  This does not mean it will make a darker color.  The color of the paint will be what the color of the pigment is.
When painting, it is best to paint onto a white surface, other colors will take away from the radiance of the color.
If you are not going to use Risk Reactor’s base, stick to the sheerest base you can find.  It needs to be as clear as possible, other color takes away from the luminosity of Risk Reactor’s pigments.
Some applications may need thick coats, test somewhere small to see how thick you should lay on the paint.  The depth of the paint layers can add to brightness.
Make sure you are working in a clean, dry area.  Risk Reactor pigments need to stay dry until they are put into the paint base.
If you are going to use your own base, it should be low in acid.
The best way to mix in pigment is to find a tool that will quickly stir, never crush the pigment.  This will destroy your glow.
Bigger pigment particles glow brighter.
The amount of pigment that will be needed to create your paint will depend on your base.  Remember that testing in small amounts is the best way to determine how you want your paint to be.

You can also order Risk Reactor’s glow in the dark paint already mixed right off our website! Always remember that here at Risk Reactor we are here to help you succeed in your projects.  Please email us if you have any questions. 


View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose

Videos Hide Videos Show Videos