Description
Our PPSB-091OZ Invisible Violet phosphorescent pigment was developed to go into oil based mediums. Glow in the Dark pigments are the basic building blocks for materials that glow in the dark. It works by absorbing ambient light and then re-emitting it in the visible spectrum. This process can be repeated an infinite amount of times. The color visible in regular light is an off white and it will glow a vibrant Violet in the dark. This "change" of color is why we refer to it as invisible. You can mix this pigment into any clear medium such as glue, paint, caukling, wax, clay, gel candles, liquid nails, silicone, urethane, you name it.
Benefits of Risk Reactor's PPSB-091OZ Invisible Violet Pigment:
- Easy to work with!
- Long afterglow lasting pigment!
- Product can last more than 15 years, unlike conventional pigment!
- Just about any light will charge it!
- Glows a strong Violet!
- Non-radioactive!
- Safe and non-toxic!
- Can be used with just about any medium!
- Charges an infinte amount of times!
Ounce of PPSB-091OZ Used In art and craft applications.
Clock & watch dials, paint, electronic instrument dial pads, poly urethane, home appliances, lighting apparatus and switches, exit signs, emergency signage and low level lighting escape systems (Egress Systems), shoes, caps, aircraft and automobile dials and instrument panels, traffic signs & high visibility signs, fishing equipment, military applications, outdoor path marking, camping equipment, textile printing and textile fibers, writing & printing inks, You can use this product anywhere a long afterglow and/or light fastness is needed.
Technical Information:
Appearance: White Powder/No Order
Melting Point: Dissociates 1200 C
Excitation Energy: 200-450 nm
Emission Wavelength: 443 nm
Vapor Pressure: N/AP
Vapor Density: N/AP
Solubility In Water: soluble
Weight Per Cube Meter: 3.0-3.6
Chemical ID: MOAl2O3:Eu
Flammability Class: N/AP
Extinguishing Media: Water
Specific Gravity: 3.0-3.6
Freezing Point: N/AP
Percent Volatile: N/AP
Evaporation Rate: N/AP
pH (% in water): N/AP
Flash Point: N/AP
Auto-Ignition Temp: N/AP.
Glow Time Chart Measured in mcd/m2
The afterglow brightness is measured under D65 standard light source excited by 1000 lux for 10 minutes. The excitation wavelength is 253.7 nm. The instrument to determine brightness LS-100. As a general rule, the larger the particle size the greater and longer the glow. The threshold of the human eye to detect light is .32 mcd/m2 with a dark adapted eye.
|
Time |
PPSB-09 (30-40 um) |
|
0 minutes |
340 |
|
.5 minutes |
113 |
|
1 minutes |
78 |
|
2 minutes |
50 |
|
3 minutes |
38 |
|
4 minutes |
30 |
|
5 minutes |
25 |
|
6 minutes |
21 |
|
7 minutes |
18 |
|
8 minutes |
16 |
|
9 minutes |
15 |
|
10 minutes |
13 |
|
20 minutes |
7 |
|
30 minutes |
6 |
|
40 minutes |
3 |
|
50 minutes |
4 |
|
1 hour |
3 |
|
2 hour |
0 |
|
3 hour |
2 |
|
4 hour |
0 |
|
5 hour |
1 |
|
6 hour |
2 |
|
7 hour |
0 |
|
8 hour |
1 |
|
9 hour |
1 |
|
10 hour |
1 |
|
11 hour |
0 |
|
12 hour |
1 |
|
Emission Peak |
443 nm |
|
After Glow Time |
160 minutes |
How to Use
This product is easy to work with. Simply mix it with a clear medium such as clear paint, clear glue, clear wax, etc. and you will have a glowing material! Follow the guidelines below to ensure you maximize the glowing effectiveness of our products.
