SS-261PT pint of Light Yellow Screen Glow in the Dark Inks

(No reviews yet) Write a Review
SKU:
SS-261PT
UPC:
802074007301
Weight:
16.00 Ounces
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 4 and get 10% off
Buy 5 - 9 and get 15% off
Buy 10 or above and get 20% off
  • SS-261PT pint of Light Yellow Screen Glow in the Dark Inks
  • Pint of phosphorescent  light yellow screening inks for fabric and textiles SS-261PT
  • SS-26PT light yellow glow in the dark screen inks for fabric
MSRP: $69.87
$39.98
— You save $29.89

Description

SS-261PT Pint of Light Yellow Glow in the Dark Screen Fabric Plastisol Inks.

Glow in the Dark Screen Inks, are specifically meant, for Screen Printing Glow in the Dark Silk Screen Printing Ink is produced by using the best Glow Powder with our special plastisol based Screen Inks.

Glow in the Dark Screen Printing Ink Instructions:

1.In order to get a better luminosity (glowing) effect of the printed patterns; use silk screen of below 200 meshes for screenprinting. Layering of the printing ink will be thicker and will obtain a better luminous effect. Using a silk screen of a lower mesh number is even better, the ideal screen is between 80~120 meshes.

2. To maximize the glowing period of the printed pattern, place a layer of white color under the layer of glow screen printing ink. It is easier if you print directly onto the white color material such as white t-shirts. Also, the thickness ranges between 130 to 150 µm will give you great results and should not be less than 100 µm. For example print the ink twice on 80-mesh silk screen.

Printer's Parameters for Risk Reactor Inc.'s Glow in the Dark Screen Inks.

Substrates 100% cotton, cotton blends, polyesters, some nylon(generally open weave or mesh types) as well as other synthetics
Bleed resistance None, use SS-WW under base white for maximum luminosity.
Mesh (on darks) 86-120 t/in (34-49 t/cm)
Mesh (on lights) 110-280 t/in (49-110 t/cm)
Mesh (fine line) 230-305 t/in (90-120 t/cm)
Gel temp 230 F (110 C)
Cure temp 320 F (160 C) entire film
Transfer temp 350 F (177 C)
Extender Up to 20 percent (by weight) SS-CC clear SS base.
Reducer Up to 5 percent (by weight)
Caution The viscosity of SS Series inks are designed to enhance opacity and print-ability. Any alteration of viscosity should be minimized.
Storage 65-90 F (18-32 C). Avoid direct sun. Use within one year of receipt.
Wash-up Screen Wash

 

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose