SS-35X1OZ ounce of Fire Red Screen Glow in the Dark Fabric Inks

(No reviews yet) Write a Review
SKU:
SS-35X1OZ
UPC:
802074007479
Weight:
2.00 Ounces
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 6 and get 10% off
Buy 7 - 11 and get 15% off
Buy 12 or above and get 20% off
  • SS-35X1OZ ounce of Fire Red Screen Glow in the Dark Fabric Inks
  • Our smelly red glow in the dark textile ink SS-35X1OZ is made in America
  • Plastisol t-shirt ink SS-35X1OZ is made for screen printing
  • Flexible and washable t-hirt ink SS-35X1OZ that glows in the dark
  • SS-35X1OZ ounce of fire red screen inks for fabric
$25.98

Description

SS-35X1OZ ounce of SS-35X Fire Red Glow in the Dark Screen Fabric Plastisol Inks.Glow in the Dark Screen Inks, are specifically meant, for Screen Printing Glow in the Dark Silk Screen Printing Ink is produced by using the best Glow Powder with our special plastisol based Screen Inks.

Glow in the Dark Screen Printing Ink Instructions:

1.In order to get a better luminosity (glowing) effect of the printed patterns; use silk screen of below 200 meshes for screenprinting. Layering of the printing ink will be thicker and will obtain a better luminous effect. Using a silk screen of a lower mesh number is even better, the ideal screen is between 80~120 meshes.

2. To maximize the glowing period of the printed pattern, place a layer of white color under the layer of glow screen printing ink. It is easier if you print directly onto the white color material such as white t-shirts. Also, the thickness ranges between 130 to 150 µm will give you great results and should not be less than 100 µm. For example print the ink twice on 80-mesh silk screen.
 

SPECIAL RECOMMENDATIONS

For bleed resistance, an under base white, such as SS-WW Extreme White undercoat is suggested.
Print using meshes 60-140 t/in (24-55 t/cm).
Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion, unacceptable durability, and increased likelihood of dye migration.
Stir plastisols prior to printing.
Do not dry clean, bleach or iron the printed area.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose