MASK14-50 is a Box of 50 MASK-14 Three Ply Disposable Protective Masks

(No reviews yet) Write a Review
7.90 Ounces
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 1000 - 5000 and get 3% off
  • MASK14-50 is a Box of 50 MASK-14 Three Ply Disposable Protective Masks
  • Bag of 50 disposable face masks for use to protect from air borne bacteria and viruses MASK14-50
  • Side view of three ply face masks MASK14-50 box of fifty
  • MASK-50 Three Ply Disposable Protective Mask
  • Top view of blue face MASK14-50 masks box of fifty
  • PPE face mask that is easy to use and protects from airborne contamination
  • Quality masks for face covering and can be used daily to prevent further spread of viruses
  • Set of four packages each with fifty disposable face coverings
  • 3 Ply Disposable Face Mask with Ear Loop
  • 50pcs 3-Ply Disposable Face Mask with Elastic Earloop Blue White
  • Disposable
MSRP: $28.56
— You save $18.57


MASK14-50 is a Box of fifty MASK-14 masks. MASK-14 is a three ply disposable protective mask These are designed as single use disposable mask with high fluid and respiratory protection.

Inner and outer fluid resistant layers.

  • Material: Non-woven Fiber Fabric
  • Elastic Soft Ear-loops
  • Measurement: 7"L x 3.5"W ( Un-expanded)
  • Comfortable, Breathable, Soft and Skin-friendly, and Easy to use
  • Made through Ultra-Sonic technology for added strength and reliability
  • All sizes are approximate measurements


Listing No: D378663 Code KHA Device name MASK SCAVENGING

Instructions How To Use:

  1. Open the mask from the container.
  2. The white side of face mask to the face, nose strip at the top.
  3. Hang on the ears.
  4. Adjust the mask size, will be carried out under the mask, completely cover the nose and mouth.
  5. Use both hands to regulate the binding bridge of the nose bridge of the nose on both sides of the face mask.

Contents: 50 disposable 3-ply pleated face masks with ear loops

  • Comfortable fitting and easy breathing
  • High BFE and PFE filtration
  • High elasticity ear hook
  • Suitable for sensitive skin

DAILY USE: Disposable face masks act as a protective barrier to prevent splashes, sprays, large droplets or splatter from entering the wearer’s mouth and nose. Disposable face masks also help prevent the wearer from spreading respiratory droplets.


  1. Before putting on a mask, clean hands with soap & water or an alcohol based sanitizer
  2. Cover mouth and nose with mask and make sure there are no gaps between your face and the mask
  3. Avoid touching the mask while using it; if you do, clean your hands with soap & water or an alcohol based sanitizer
  4. Replace the mask with a new one as soon as it is damp and do not re-use single-use masks.

3-LAYER PROTECTION: Non-woven fabric outer layer, high density filter layer & skin friendly contact layer

SUITABLE USE: Ideal for running errands and visiting public areas such as grocery stores, pharmacies, parks, post offices and more where social distancing may be more difficult to maintain


3 Ply Disposable Mask FDA Description


mask, scavenging

Regulation Description

Scavenging mask.

Regulation Medical Specialty


Review Panel


Product Code


Premarket Review

Ophthalmic, Anesthesia, Respiratory, ENT and Dental Devices (OHT1)
ENT, Sleep Disordered Breathing, Respiratory and Anesthesia Devices (DHT1C)

Submission Type

510(K) Exempt

Regulation Number


Device Class


Total Product Life Cycle (TPLC)

TPLC Product Code Report

GMP Exempt?


Summary Malfunction


Note: FDA has exempted almost all class I devices (with the exception of reserved devices) from the premarket notification requirement, including those devices that were exempted by final regulation published in the Federal Registers of December 7, 1994, and January 16, 1996. It is important to confirm the exempt status and any limitations that apply with 21 CFR Parts 862-892. Limitations of device exemptions are covered under 21 CFR XXX.9, where XXX refers to Parts 862-892.

If a manufacturer's device falls into a generic category of exempted class I devices as defined in 21 CFR Parts 862-892, a premarket notification application and fda clearance is not required before marketing the device in the U.S. however, these manufacturers are required to register their establishment. Please see the Device Registration and Listing website for additional information.

Implanted Device?


Life-Sustain/Support Device?


Third Party Review

Not Third Party Eligible

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose