PPSB-0B1LB Bright White Luminous Pigments by the Pound for Paint and Coatings

The PPSB-0B bright white glows more than the visible glow in the dark pigments and less than the PPSB-06 pigment and our PPSB-10. These are the strongest pigments on the market today. Both of these can glow for more than 100 hours on a single charge and are rechargeable. Our PPSB-0B true white phosphorescent pigment was made for non water based mediums. You can put in water for a short while, just have to use it in one sitting, can not store for long periods. You can use the pigment in water based medium for a short period of time, such as mixing and then using. Phosphorescent pigment is the basic building block for material that glows in the dark. It works by absorbing ambient light and then re-emitting it in the visible spectrum. This process can be repeated an infinite amount of times. The color visible in regular light is an off white and it will glow a vibrant Yellow Green in the dark. This "change" of color is why we refer to it as invisible. You can mix this pigment into any clear medium such as glue, paint, wax, clay, gel candles, liquid nails, silicone, urethane, you name it.

Benefits of Risk Reactor's PPSB-0B Invisible White Pigment:

The PPSB-0B bright white is easy to work with!
Long afterglow lasting pigment! 
Product can last more than 15 years, unlike conventional pigment!
Just about any light will charge it!
Glows a strong Bright White!
PPSB-0B  is  non-radioactive,!
Safe and non-toxic to use and mix with your own mediums!
Can be used with just about any non-aqueous medium!

Basic Guidelines For Using Risk Reactor Glow in the Dark Pigments.

More powder, higher percentage will produce brighter, longer glow.
Use a white, or light color as a background for best results. Any color other than white will diminish glow.
Use the clearest vehicle possible. Any pigment in the vehicle will decrease the brightness and length of glow.
The thicker (to a point) the layer of Risk Reactor's Glow in the Dark Pigment will produce longer and brighter luminosity. Try to prevent moisture in the manufacturing process. Do not use vehicle with high acidity.
Do not grind the Glow in the Dark Pigment , it will destroy the crystal structure and therefore decrease luminosity. The larger the particle size of the Glow in the Dark Pigment the greater the glow.
Ratio of Glow Powder to medium is from 10% to 50% by weight depending on application and manufacture process.