IFWB-141PT Pint Visible Blue Water Tracer Concentrate NDT Dye

(No reviews yet) Write a Review
16.00 Ounces
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 5 and get 10% off
Buy 6 or above and get 15% off
  • IFWB-141PT Pint of Blue Visible Blue Water Tracer Concentrate NDT Dye
  • Water leak detection dye and natural colorant IFWB-141PT dyes your world blue
  • IFWB-141PT Blue water dye in concentrate form UPS approved and NSF certified
  • IFWB-141PT Pint of blue water tracing dye that is non-fluorescent but can be used in pools and ponds
  • EPA approved and NSF certified for drinking water blue dye IFWB-141PT.


IFWB-141PT pint of Risk Reactor Inc.'s IFWB-14 Blue non-fluorescent water based tracer is specially formulated version of food grade dye FD & C Blue. IFWB-14 Blue has been certified by International to the ANSI/Standard 60 for use in drinking water. 1 Pint Treats 12,500 gallons for visual inspection, 125,000 gallons if used with one of our black lights. This dye is used for visual detection only and cannot be seen under ultraviolet light or detected by fluorometry. For these please see IFWB-C8, IFWB-C7, and IFWB-33. However, when used visually, its color is often thought to be more acceptable to public view than the fluorescing red or yellow green. In this respect, it is sometimes used in fountains, ponds and streams for decorative effect. Visually, the dye appears as aqua to royal blue depending on its concentration and activity of the water. Certified To Meet EPA Standards This is a certification that these products conform to the ANSI/Standard 60 for potable water as set forth by the EPA in The Clean Water Act.

SPECIAL DEAL! Buy four pints of any IFWB Series color and get FREE SHIPPING! Use the code: IFWBPINT4

General Properties

Part Number: IFWB-14 Liquids

Part Number: DFTB-14 Tablets Part Number: DFWB-14 Powder
Detectability of active ingredient Visual <100 ppb  Visual <100 ppb  Visual <100 ppb
Maximum absorbance wavelength

630 nm

 630 nm  630 nm


Clear, dark blue aqueous solution

 Lt. Blue speckled 1.6cm diameter  Dark blue fine powder

NSF, max use levels in potable water

1200 ppb 2000 ppb  100 ppb


n/a  1.25 gms +0.05  n/a
Dissolution Time


50%  < 3 minutes
95%  < 6 minutes
 50%  < 3 minutes
95%  < 6 minutes
Specific Gravity Immediately  n/a  n/a
Viscosity 1.04 0.03 @ 25° C  n/a  n/a
pH  5.2 1.0 @ 25° C  n/a  n/a
Coverage of Products  One Pint Liquid  One Tablet  One Pound Powder

Light Visual (100 ppb)

125,000 gallons

 200 gallons  1,200,000 gallons

Strong Visual (1 ppm)

12,500 gallons

 20 gallons  120,000 gallons

The IFWB-C8 Yellow Green, IFWB-33 UV Orange, IFWB-C7 UV Red, and IFWB-14 are EPA Approved and Certified for drinking water. The IFWB-C8 Yellow Green is highly fluorescent and visible while the IFWB-14 Blue is just used visually and is used to give pools a blue tint. Our IFWB-C0 is special clear to color blue requiring a black light and is not as strong as the others nor approved for drinking water. Dilute the IFWB-C0 1:40 1:100 for starting ratios, which makes this hard for large projects. Hence, the IFWB-C8 1 pint treats 125,000 gallons is hard to beat. The IFWB-C8 is EPA approved but has a visible color along with being extremely bright under black light. Since it does have a yellow green visible color it attracts attention so in some circumstances IFWB-C0 or other clear blue has to be used.

Based on biochemical oxygen demand (BOD) studies, the dye is biodegradable with 77% of the available oxygen consumed in 7 days. As always the suitability of these products for any specific application should be evaluated by a qualified hydrologist or other industry professional.


The IFWB-14 is an EPA Approved, NSF Certified for drinking water non-fluorescent dye. This is used to make a pool more inviting with a blue tint. We have IFWB-C0 a clear to color blue only under black light but this is not approved for swimming pools just water fountains, and other water special effects. The IFWB-C0 would need about 2 gallons to make it really pop depending on the pool size, one gallon might do it. The IFWB-C8 yellow green is EPA Approved, NSF Certified for drinking water highly fluorescent dye where 1 pint will do 12,500 gallons without black light, 125,000 gallons with a black light.

Certified To Meet EPA Standards This is a certification that these products conform to the ANSI/Standard 60 for potable water as set forth by the EPA in The Clean Water Act.

Benefits of Risk Reactor Inc's IFWB-14 Blue Non-Fluorescent Water Based Tracer:

Pleasing Blue Color!
Cleans up with water!
Highly concentrated saving you money!
Safe and non-toxic!

Used In:

- Plumbing Tracing.
- Retention Time Studies.
- Flow mapping and rate of flow studies.
- Condenser coil and tube studies.
- Power plant piping tracing.
- Septic system analysis.
- Pollution Studies.
- Leak Detection in many fluid carrying systems.
- Lake river and pond analysis.
- Check for illegal connections.
- Storm and sewer drain analysis.
- Agricultural Agencies.
- Conservation districts.
- Fish and wildlife authorities.
- Fire departments.
- Ocean studies .
- Swimming pool services.
- Geologists.
- Environmental consultants.
- Farms and ranches.
- Food processing.

Caution: These products may cause irritation and/or staining if allowed to come in contact wit the skin. The use of gloves and goggles is recommended when handling this product, as with any other dye or chemical. To our best knowledge the information and recommendations contained herein are accurate and reliable. However, this information and our recommendations are furnished without warranty, representation, inducement, or license of any kind, including, but not limited to the implied warranties and fitness for a particular use or purpose. Customers are encouraged to conduct their own tests and to read the material safety data sheet carefully before using.

View AllClose

Warranty Information

This unit is warranted to be free from material and workmanship defects for a period of thirty (30) days from the date of original purchase. Supplier's limit of liability under this warranty is to repair or replace the product at Supplier's option. Consequential costs such as, but not limited to, loss of use, loss of time or freight charges are not covered. Any product that has been abused, altered, tampered or incorrectly operated is not covered. Product finish is excluded from this warranty. No other warranties are expressed or implied. We reserve the right to make changes in design, materials and specifications without prior notice.
View AllClose

Videos Hide Videos Show Videos