PPSB-061LB One Pound of Yellow Green Glow in the Dark Pigment

PPSB-061LB One Pound of Yellow Green Glow in the Dark Pigment. Risk Reactor Inc.'s glow in the dark series of photo luminescent pigment were developed for your luminous project. Simply add the powder to your clear medium and it will glow after being charged with light. 

Our team of chemists have developed the best performing phosphorescent powder on the market.  PPSB-061LB this pigment, along with our PPSB-10 is one of the strongest pigments on the market today. Both of these can glow for more than 100 hours on a single charge and are rechargeable. Our PPSB-06 Invisible Yellow Green phosphorescent pigment was developed to go into non water based mediums only. You can use the pigment in water based medium for a short period of time, such as mixing and then using.

Phosphorescent pigment is the basic building block for material that glows in the dark. It works by absorbing ambient light and then re-emitting it in the visible spectrum. This process can be repeated an infinite amount of times. The color visible in regular light is an off white and it will glow a vibrant Yellow Green in the dark. This "change" of color is why we refer to it as invisible. You can mix this pigment into any clear medium such as glue, paint, caulking, wax, clay, gel candles, liquid nails, silicone, urethane, you name it. Some call this a natural glow powder but we call them invisible. It is usually an off white or light in color. Most often they appear off-white in normal daylight then glows either green, aqua, blue, purple or white in the dark. If mixed at a low loading, 10% instead of 30% then it can appear invisible or transparent i the coating.

How to Use:
This product is easy to work with. Simply mix it with a clear medium such as clear paint, clear glue, clear wax, etc. and you will have a glowing material! Follow the guidelines below to ensure you maximize the glowing effectiveness of our product. More powder, higher percentage will produce brighter, longer glow. Use a white, or light color as a background for best results. Any color other than white will diminish glow. Use the clearest vehicle possible. Any pigment in the vehicle will decrease the brightness and length of glow. The thicker  the layer of Glow Powder will produce longer and brighter up to a point. Try to prevent moisture in the manufacturing process. Do not use vehicle with high acidity and if you do keep your pot life short. Do not grind the Glow Powder, it will destroy the crystal structure and therefore decrease luminosity. Ratio of Glow Powder to medium is from 10% to 50% by weight depending on application and manufacture process. Best to start with 30% and move and down depending on cost, manufacturing process, and other factors that are unique to your application.