Part number 6PACK1OZC7 is six ounces of our clear red IFWA-C7 UV Black Light Ink.
Our Clear Red Fluorescent Readmission Inks go on clear and fluoresce brightly under long wave black light. This is a simple, portable, and inexpensive way to control paying patrons leaving and returning to an event. The mark is invisible to the naked eye allowing the attendees to return to work and school without a "been at a bar" marking on their hand. You can make thousands of marks from a single bottle making it very economical. When used with our battery operated black lights, you now have a security system that is portable. For permanent situations we also carry plug in mounted black lights. Keep in mind if you have a unique need Risk Reactor will manufacture an ink to meet your requirements.
"Our event had a VIP section so we use the IFWA-C7 UV red to distinguish our regular paying customers from the higher paying clients. We used SUPERTAC-365 to see the marks and used the same light to verify IDs at the entrance. Awesome!"
Dewayne M. Atlanta, GA
Benefits of Risk Reactor's 6PACK1OZC7 Clear Red Readmission Ink:
Goes on absolutely clear!Strong long lasting invisible ink!
Fluoresces a bright Red under long wave black light!
Simple To Use and it literally pays for itself.
Made For Long Wave Black Lights!
Ready To Use - No Mixing!
Hard to duplicate preventing loss of revenues!
Theme parks, clubs, dance halls, sports events, school events, private parties, race tracks, movie screenings, outdoor events, water parks, any situation where you need to control people either for security or revenue loss prevention.
How to Use the 6PACK1OZC7:
Use by applying a rubber-stamp imprint of our fluorescent ink to the patron's hand. The ink is invisible on the skin, dries within seconds, and cannot be transferred or washed off. The ink dries fast so that the patron can not share the image with other patrons. Pass the hand under a black light to see the invisible marking. This bright, durable ink works up to twenty four hours. You may change colors periodically, or change the marking pattern so as to control traffic into separate shows or security areas. It is suggested to use a non-symmetrical stamp to ensure difficulty is duplicating and to change color periodically.
Fluorescent Readmission Inks can also be used on most surfaces. The ability to track people or products saves you money. You can also use this ink on paper, textiles, etc. Tickets, raffle tickets, and other important documents can be tagged using this ink. Risk Reactor will also formulate new inks to suite your needs.
6PACK1OZC7 Invisible UV Red Ink's Technical Information:
Specific Gravity AF: 0.79 at 68
Density at -f 6.6 lbs/gal at 68
Solubility in Water wt. % at AF: 100.00 at 68
SP Grav. Of Vapor at 1 atm (air=1): Greater than 1.00
Evaporation Rate n-bu acetate=1: 2.3
Vapor Pressure mmhg at AF: 46 at 77
Viscosity of Liquid AF: -128
Freezing/melting point AF: 180 to 181
Packaging: Gallon, Pint Containers.
Our inks are used extensively to control admission by marking patrons of bowling alleys, racetracks, amusement parks, dance halls, bars, rodeos, concerts, or any event. People also use our Readmission Inks to prevent people from obtaining second servings, gifts, or other valuable products by marking patron.
Applications.Use by applying a rubber stamp (We make custom stamps, click here for more information.) imprint of our fluorescent ink to the patron's hand. The ink is invisible on the skin, dries within seconds, and cannot be transferred or washed off. The ink dries fast so that the patron can not share the image with other patrons. Pass the hand under one of our black lights to see the invisible marking. This bright, durable ink works up to twenty four hours. You may change colors periodically, or change the marking pattern so as to control traffic into separate shows or security areas. It is suggested to use a non-symmetrical stamp to ensure difficulty is duplicating and to change color periodically.
How do I use the kit? Pour enough IFWA-C0 Cancun Clear Blue to wet the surface (cap full) of a clean PAD-1 Un-Inked Stamp Pad. Then stamp on the wet pad and then onto the desire surface. Review the invisible mark under one of Risk Reactor’s offered Black Lights such as the B14LED a 14 UV LED powerful, portable Black Light (3 AA INCLUDED!) that you now have. We also manufacture Special Readmission Inks for clients that have a particular need such as slower drying, faster, stronger, and non-flammable characteristics. We carry portable, battery-operated, and plug in black lights, so you can use them with or without a power source. You can also use the kit to mark other porous surfaces such as paper, tickets, coupons, etc as a security mark.
Our UVSTAMPER-KIT complete Readmission Kit is the perfect way to get started on controlling patron admission to an event, party, or club. Our ink is incredibly brilliant and easy to see allowing your staff to be efficient in pass through traffic. Send in your black and white image via email to [email protected] Save Money by Buying the Kit!
Includes the Following:
* 1 Unique Stocked Stamp!
* High Quality 14 UV LED Portable Battery Operated Black Light (B14LED) WITH BATTERIES! Perfect kit for each door of entry.
* PAD Uninked Felt Sponge Stamp Pad!
* IFWA-C0 1 Pint of Risk Reactor's Clear Cancun Blue Readmission Ink!
Our Readmission Kit has everything you need in one box! Safe, simple, portable, and convenient!